***Construction in progress***

[VP_07SRT8]

Engine/Performance mods:

- 3.73 CRYO treated FRPP gears
- SPEC Billet steel flywheel
- T-56 tranny w/ viper cryo internals and cryo upgraded 26 spline input shaft
- MSD 8.5 Super Conductor Spark Plug Wire
- MSD Blaster Coils Packs
- RUSSELL Steel Re-in forced Brake Lines
- Hawk HPS street brake pads
- MGW Short Shifter
- Custom Aluminum drive shaft
- FRPP Drive shaft safety loop
- Upgraded Quicktime steel bell housing
- TA rear end girdle
- Steeda Mil Eliminators
- Steeda Under drive Pulleys
- Steeda Oil Separator kit
- Steeda clutch cable, firewall adj kit
- Accufab throttle body
- BBK Off Road X-pipe
- Energy Suspensions Polyurethane Engine mounts
- JLT TRU Cold Air Intake
- Flow master custom exhaust
- HD King Cobra Clutch Kit
- Yukon heavy duty axle
- Baer Decela Rotors front and rear
- Ford Racing Shorty Headers
- Traction-LOK rebuild kit
- Prothane Transmission mount
- SCT X-Calibrator 3
- CR1 Corbeau Microsuede seats (black) left and right
- adjustable lumbar left and right
- 5th slot addition both seats
- Corbeau seat tracks
- Nitto 305/35ZR-18 101Y B NT 555R Drag Radial (rear)
- Nitto 265/35ZR-18 93W B NT 555 Extreme Performance (front)
- CANTON Expansion Tank


Suspension Mods:
- MM adjustable rear lower control arms
- MM tubular K-member
- MM FWD offset control arms w/ derlin bushings
- MM Front Coil Over Kit w/ hypersprings
- MM Rear Coil Over Kit w/ hypersprings
- MM panhard bar
- MM 4 point K-member brace
- MM full length sub-frame connectors
- MM 3 bolt caster/chamber plates
- MM pinion snubber
- Steeda X2 Balljoints
- Steeda Bumpsteer kit
- Steeda Shock Tower Brace
- Polyurethane Offset Rack Bushings
- Camber Adjustment bolt kit
- Bilstein axle wrap shocks-
- Bilstein HD shocks and struts
- Eibach front sway bar(anti roll kit)
- Eibach rear sway bar(anti roll kit)
- Prothane bushings for sway bars
- Polyurethane exhaust hangers
- Lakewood upper control arms

Appearance mods:
- Steeda Black Shift knob
- Black lug nut set
- 8" shorty antenna
- American Muscle Rear Seat Delete kit
- Black FR500 (18x9) front
- Black FR500 (18x10) back
- Smoked Fog Lights
- Gray Cobra emblem trunk liner
- FRPP Competition Shift Light Tachometer
- Sequential tail light kit
- CERVINI Cobra "R" 3.5" fiberglass hood



Current wish list:
- Full length headers
- Rovos Durban wheel
- Baer trak 4 big brake kit (red)
- Competition T shift handle
- Billet pistol grip shift handle
- LED licence plate conversion kit
- Battery
- 3" Corbeau 5 pt camlock harness
- MM torque arm
- Corbeau seat belt harness bar
- Prothane total bushing kit
- Steering shaft assembly
- Strut tower brace
- Locking lug nuts

 

[IgottaV8]

Pictures or it didn't happen

 

[VP_07SRT8]

***Construction in progress***
nothing on craigslist. About to order chilton from amazon. Dantes and LCR going to be on speed dial over next 2 months.

 

[DSGimportslayer]

Coyote swap or more subtle approach?

 

[VP_07SRT8]

I have been away from San Diego for 7 years, I will be posting a lot asking for shop recommendations for different things, help for installing. I offer bribes with pizza, beer, cigar, and or percentage to your pocket/percentage to WS race car and wrenching will be in the East Lake area until mobile.

 

[DSGimportslayer]

Coyote swap or more subtle approach?

Also can't remember if it's four linked or not

 

[VP_07SRT8]

Coyote swap or more subtle approach?

WELL it really depends on what Dante says when he opens her up on the 28th. I haz budget since not a single sailor anymore lol. window for funds is 11k right now. For sure want full length headers, tub k member, and tires outside of engine. Other than that its a pretty complete car. Down the road paint job.

 

[DSGimportslayer]

Yes well I'm here to help if you need it bud

 

[VP_07SRT8]

Yes well I'm here to help if you need it bud

mucho gracias! Ill keep this thread alive, well see here in a few days how things play out with NFCU. since vic is over 20 had to get it appraised for them to give me mula.

 

[Mustangcwo]

WOW, great thread...break out the pizza box and beers...OK and some tools.

 

[IgottaV8]

I have been away from San Diego for 7 years, I will be posting a lot asking for shop recommendations for different things, help for installing. I offer bribes with pizza, beer, cigar, and or percentage to your pocket/percentage to WS race car and wrenching will be in the East Lake area until mobile.

If it's a Sunday I'll make my way out. Sounds like good old fun.

 

[VP_07SRT8]

yeah once car is over here will be taking apart, initially going to be a lot of cleaning and prep for dantes. but plan is to start a list over the next 2 weeks os stuff to get taken car of while engine is out then a down the road list. main goal is on the road and reliable....with a little NA power

 

[VP_07SRT8]

1. some kmember options:
http://www.ebay.com/itm/1996-2004-F...ash=item43dc33071d:g:xrsAAOSwQJ5USPFG&vxp=mtr

http://www.ebay.com/itm/AJE-Suspens...ash=item4afbbcc56a:g:hSQAAOxybqpRiXXX&vxp=mtr

2. or the maximum motorsports kmember?

3. radiator/fan fluidyne or mishimoto?

4. Also any recomendations on full length headers?

5. place to get tires?

6. to get rims cleaned up?

Plan is to drive to work (east lake to coronado) once or twice a week and obviously for weekend fun

 

[DSGimportslayer]

You already have a arms?

 

[VP_07SRT8]

You already have a arms?

i honestly don't remember

 

[VP_07SRT8]

Added wishlist to OP. Calling Emerson tomorrow for k member, radiator, control arms, throttle body, and maybe also the headers.

 

[IgottaV8]

The question is what are you going to be doing with the car, if you plan on road racing it the maximum motorsports is the best option if you're just going to drag race it, you can go with team Z or other K member. Mild steel for road racing, chrome moly for street/strip

 

[VP_07SRT8]

The question is what are you going to be doing with the car, if you plan on road racing it the maximum motorsports is the best option if you're just going to drag race it, you can go with team Z or other K member. Mild steel for road racing, chrome moly for street/strip

Probably mainly road race but straight line once and awhile. I want to have one of the best handling stangs in SD. Ordered throttle body, MM K member, MM fwd offset control arms, and radiator today

 

[IgottaV8]

Make sure you get offset steering rack bushings and coil overs and stuff. How lowered is it going to be?

 

[VP_07SRT8]

already has:
- MM adjustable rear lower control arms
- MM Front Coil Over Kit w/ hypersprings
- MM Rear Coil Over Kit w/ hypersprings
- MM panhard bar
- MM 4 point K-member brace
- MM full length sub-frame connectors
- MM 3 bolt caster/chamber plates
- MM pinion snubber
- Steeda X2 Balljoints
- Steeda Bumpsteer kit
- Steeda Shock Tower Brace
- Polyurethane Offset Rack Bushings
- Camber Adjustment bolt kit
- Bilstein axle wrap shocks-
- Bilstein HD shocks and struts
- Eibach front sway bar(anti roll kit)
- Eibach rear sway bar(anti roll kit)
- Prothane bushings for sway bars
- Polyurethane exhaust hangers
- Lakewood upper control arms

going to leave it where it sits now in ride height