-
Hello there guest and welcome to our forum!
To gain full access you must Register. Registration is free and it takes only a few moments to complete.
Already a member? Login here then!
Some new parts
- Thread starter 94riogt
- Start date
dat der pretty uhmmmmmhmmmm
very nice looking good.. Now post a picture of your car
HisPony
Wondering where I am!?!?
Definately a Bach house!!
Car parts on the carpet would get most of us killed!! :rofl
rofl:
Car parts on the carpet would get most of us killed!! :rofl
rofl:
Very nice! Where did you get that from?
M
Mustangcwo
Guest
Nice work, you'll like the results. Where are the pics of the car??
Actually got all the parts locally off of a few different people on CL. Everything is brand spankin new outa the box except for the coilover kit.
Heres a few shots of the car from awhile ago, I havent taken any recently and i'll need to take new ones once the headlights, tint and coilovers are on
No, shes not a Cobra, the previous owner stuck those on and I just havent had the time to go to the junkyard to get some GT badges.
Shes got JBA ceramic coated shorty headers, catless h-pipe, flowmaster catback, H&R sport springs, saleen K-member brace, kenny brown subframe connectors, FRPP King cobra clutch, FRPP adjustable clutch cable, Steeda firewall adjuster, Steeda clutch quadrant, 3.73 gears, Hurst short throw shifter, MSD cap/rotor, MSD coil, supposedly a cam and 1.6 roller rockers aswell but ive never taken the valve covers off so I dont know fersure yet.
Parts going on:
Tokiko Illumina shocks/struts
coilovers with 300# springs
Steeda caster/camber plates
Steeda adjustable rear sway bar
Steeda HD upper control arms(might not install these since I plan on going panhard bar/torque arm in the next few months)
Heres a few shots of the car from awhile ago, I havent taken any recently and i'll need to take new ones once the headlights, tint and coilovers are on
No, shes not a Cobra, the previous owner stuck those on and I just havent had the time to go to the junkyard to get some GT badges.
Shes got JBA ceramic coated shorty headers, catless h-pipe, flowmaster catback, H&R sport springs, saleen K-member brace, kenny brown subframe connectors, FRPP King cobra clutch, FRPP adjustable clutch cable, Steeda firewall adjuster, Steeda clutch quadrant, 3.73 gears, Hurst short throw shifter, MSD cap/rotor, MSD coil, supposedly a cam and 1.6 roller rockers aswell but ive never taken the valve covers off so I dont know fersure yet.
Parts going on:
Tokiko Illumina shocks/struts
coilovers with 300# springs
Steeda caster/camber plates
Steeda adjustable rear sway bar
Steeda HD upper control arms(might not install these since I plan on going panhard bar/torque arm in the next few months)
Definately a Bach house!!
Car parts on the carpet would get most of us killed!! :rofl
exactly what i was thinking
Tommy
New Member
You WILL feel a great difference.
All those parts spread out....looks like my garage right now :rock:
All those parts spread out....looks like my garage right now :rock:
Ha I sure am hoping that I will, my only concern is the CC plates. They are the Steeda 3-bolt design. From what I have been reading you should use a 4 bolt design with coilovers, however I was reading on the griggs website they actually suggest a 3 bolt design. There CC plates are super beefy but they are made of aluminum, the Steeda plates arent as beefy but they are steel so im thinking that will make up for this?
MM suggests a 4-bolt because of flex in the 3 bolt design, and I respect MM and believe what they say. But I also respect Griggs just as much, if not more, and they say essentially the opposite of what MM says.
You guys think im alright with these Steeda plates? I got them brand new for $60 and they are like $190 direct from Steeda so I figure even if they bend (which im thinking is the most likely thing to happen if there is a failure) im not really out that much.
What do you guys think?
MM suggests a 4-bolt because of flex in the 3 bolt design, and I respect MM and believe what they say. But I also respect Griggs just as much, if not more, and they say essentially the opposite of what MM says.
You guys think im alright with these Steeda plates? I got them brand new for $60 and they are like $190 direct from Steeda so I figure even if they bend (which im thinking is the most likely thing to happen if there is a failure) im not really out that much.
What do you guys think?
HisPony
Wondering where I am!?!?
HP2 says if I ever lay car parts on her carpet for pictures I will have two little lumps in my throat after she places as well put kick!!
Other than that, we say you got some nice looking parts to put in!
joker
Well-Known Member
Sell me the cc and get the 4 point one lol but nice stuff man
Ha I have considered selling them, but for the price I got them at if they do end up working out it would be a real steal! I figure if I resold them itd be for like around $100 then im still out another $100 on the MM plates even though these Steeda plates cost the same new. Lamesauce